Chapter 4, Snmpv2 and snmpv2c commands, Chapter 4 snmpv2 and snmpv2c commands – Allied Telesis AT-S63 User Manual
Page 65
Advertising
65
Chapter 4
SNMPv2 and SNMPv2c
Commands
This chapter contains the following commands:
❑ “ADD SNMP COMMUNITY” on page 66
❑ “CREATE SNMP COMMUNITY” on page 68
❑ “DELETE SNMP COMMUNITY” on page 71
❑ “DESTROY SNMP COMMUNITY” on page 73
❑ “DISABLE SNMP AUTHENTICATETRAP” on page 75
❑ “DISABLE SNMP COMMUNITY” on page 76
❑ “ENABLE SNMP AUTHENTICATETRAP” on page 78
❑ “ENABLE SNMP COMMUNITY” on page 79
❑ “SET SNMP COMMUNITY” on page 80
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on SNMPv1 and SNMPv2c, refer to
Chapter 4, “SNMPv1 and SNMPv2c” in the AT-S63 Management
Software Menus Interface User’s Guide.
Advertising