Allied Telesis AT-S39 User Manual
Page 155
AT-S39 User’s Guide
155
When you activate the 802.1Q-compliant VLAN mode, you are asked to
specify the uplink port for all the client VLANs. Once you have specified
the port, the switch automatically configures the VLANs.
Table 8 is an example of this multiple VLAN mode. It shows the client
VLANs on a switch that supports 26 ports. Port 15 has been selected as
the uplink port.
Note
In 802.1Q Multiple VLANs mode, the device connected to the uplink
port must be 802.1Q-compliant. It must be able to handle tagged
packets.
Table 8 802.1Q-Compliant Multiple VLAN Example
VLAN Name
VID
Untagged Port
Tagged Port
Client_VLAN_1
1
1
15
Client_VLAN_2
2
2
15
Client_VLAN_3
3
3
15
Client_VLAN_4
4
4
15
Client_VLAN_5
5
5
15
Client_VLAN_6
6
6
15
Client_VLAN_7
7
7
15
Client_VLAN_8
8
8
15
Client_VLAN_9
9
9
15
Client_VLAN_10
10
10
15
Client_VLAN_11
11
11
15
Client_VLAN_12
12
12
15
Client_VLAN_13
13
13
15
Client_VLAN_14
14
14
15
Uplink_VLAN
15
15
Client_VLAN_16
16
16
15
Client_VLAN_17
17
17
15