Allied Telesis AT-S39 - Manual (Page 21)

AT-S39 User’s Guide
21
Note
The default settings for the management software can be found in
Appendix A, AT-S39 Default Settings on page 331.
To actively manage a switch, such as to change or adjust the operating
parameters, you must access the switch’s AT-S39 management software.
The AT-S39 software features a menu interface and a command line
interface that make it very easy to use, and a special interface for
managing a switch with a web browser.
There are four different ways to access the management software on an
AT-8000 Series switch. In this guide, these methods are referred to as
management sessions. They are:
❑ Local Management Session
❑ Telnet Management Session
❑ Web Browser Management Session
❑ SNMP Management Session
The following sections in this chapter briefly describe each type of
management session.