Allied Telesis AT-S29 User Manual
Page 57
AT-S29 Management Software User’s Guide
57
Port Priority Configuration
The default priority for all ingress ports is zero. Therefore, any inbound
frames that do not have priority tags will be placed in the low priority
outlet queue. Default priority is only used to determine the output
queue for the current port; no priority tag is actually added to the frame.
You can use the 802.1P Port Priority Configuration menu to adjust
default priority for any port as shown below:
802.1P Port Priority Configuration : Unit 1 Port 1 - 12
=======================================
Port
Default Ingress
Number of Egress
User Priority
Traffic Class
-----------------------------------------------------
1
0
2
2
0
2
3
0
2
4
0
2
5
0
2
6
0
2
7
0
2
8
0
2
9
0
2
10
0
2
11
0
2
12
0
2
<APPLY> <OK> <CANCEL> <PREV Unit> <NEXT UNIT> <PREV
PAGE> <NEXT PAGE>
Use <TAB> or arrows keys to move, other keys to make
changes.
Parameter
Description
Port
Numeric identifier for switch port.
Default Ingress
User Priority
Default priority can be set to any value from 0-7,
where 0-3 specifies the low priority queue and 4-
7 specifies the high priority queue.
Number of Egress
Traffic Classes
Indicates that this switch supports two priority
output queues.