Network topologies, Power workgroup topology – Allied Telesis AT-GS908 User Manual
Page 20
Product Description
10
Network Topologies
This section illustrates two network topologies that you can create with
the AT-GS908 Gigabit Ethernet switch: a power workgroup and
collapsed backbone. Both types of topologies are described below.
Power
Workgroup
Topology
The topology shown in Figure 3 is commonly referred to as a power
workgroup topology. Each workstation or end-node is connected
directly to a port on the switch. Each end-node has a dedicated data link
to the switch for best performance and reliability. The devices can
operate at 10 Mbps, 100 Mbps or 1000 Mbps.
Figure 3 Power Workgroup Topology
AT-GS908
10/100/1000Base-T Gigabit Ethernet Switch
10
100
ACT
FDX/COL
PWR
1000
1
2
3
4
5
6
7
8
2
3
4
1
6
7
8
5
Legend
10 Mbps
100 Mbps
AT-GS908 Gigabit Ethernet Switch
1000 Mbps