Allied Telesis AT-FS909SX - Manual (Page 17)

7
Chapter 2
Installation
This chapter describes the how to install the AT-FS909SX on a desktop, or into
a 19-inch rack.
Verifying Switch Package Contents
Make sure the following items are included in your switch package. If any of
the following items are missing or damaged, contact your sales representative.
❑ One AT-FS909SX switch
❑ This Installation Guide
❑ Warranty card
❑ Four rubber feet for desktop installation
❑ Two brackets, eight flathead Phillips screws, and four large screws
and nylon washers for installation into a 19-inch rack
❑ Power cord (Americas, EC, Australia, and UK only)
❑ Additional serial number stickers, for your convenience