Allied Telesis AT-FS909SX - Manual (Page 21)

AT-FS909SX Installation Guide
11
Warning
Do not stare into the laser beam. ! 7
6. Connect the data cables and observe normal operation as indicated by
the port LEDs. Refer to Table 1 on page 3 for LED information. For
Port 1, set the MDI Button to the correct setting. Refer to Table 2 on
page 4 for the MDI setting.
7. Optional: place one of the additional serial number stickers supplied
with your switch on an accessible part of the switch for your
convenient reference.
Warranty Registration
When you finish the installation, register your product by completing the
enclosed warranty card and sending it in, or by visiting our web site at
www.alliedtelesyn.com/warr-reg.htm and completing the on-line
registration.