R.p.s. input connector specifications – Allied Telesis AT-8324 User Manual
Page 19
AT-8316F and AT-8324 Quick Install Guide
13
R.P.S. Input Connector Specifications
Table 5 lists the pin assignments for the R.P.S. Input connector on the back of
the Ethernet switch. (Pin numbers 1 through 8 are the bottom row of pins on
the connector, with pin 1 in the bottom right corner. Pin numbers 9 through
16 are the top row, with pin 9 in the top right position on the connector.)
Telnet Access
Enabled
System Name
None
Omega Password
No password assigned
Omega Time-out Value
5 minutes
Download Password
ATS25
8324 Duplex Mode
Auto-negotiating
8316F Duplex Mode
Full-duplex
High Port Speed
Auto-negotiating
Active Aging Time (MAC address table)
300 seconds
Domain Name
None
VLAN Name
Default VLAN (all ports)
PVID/VID
1
Table 5 RPS Input Port Pin Assignments
Pin Number
Function
1
+12V dc
2
Remote Sense (RS) +5V dc
3
Remote Sense (RS) Ground
4
Remote Sense (RS) +3.3V dc
5
Redundant Power Supply (RPS) Present
6
Ground (+3.3V dc Return)
7
Ground (+5V dc Return)
Settings
Default