Allied Telesis AT-S39 - Manual (Page 38)

Section II: Local and Telnet Management
38
The System Configuration Menu in Figure 4 is displayed.
Figure 4 System Configuration Menu
2. Type 4 to select BOOTP/DHCP.
The following prompt is displayed:
BOOTP/DHCP (E-Enabled, D-Disabled):
3. Type E to enable BOOTP and DHCP services on the switch or D to
disable the services and press Return. The default is disabled.
4. Type S to select Save Configuration Changes.
5. Reboot the switch using either the management software or the reset
button on the back panel of the switch.
Allied Telesyn AT-8024 Ethernet Switch
System Config Menu
1 - MAC Aging Time ................... 300 seconds
2 - Switch Mode ...................... Tagged
3 - Console Discount Timer Interval .. 10 minute(s)
4 - BOOTP/DHCP........................ Disabled
5 - Web Server Status ................ Enabled
6 - SNMP Access ...................... Enabled
7 - Advanced Configuration
8 - Reset to Factory Defaults
S - Save Configuration Changes
R - Return to Previous Menu
Enter your selection: