Allied Telesis AT-S39 - Manual (Page 62)

Section II: Local and Telnet Management
62
Displaying Uplink Information
The AT-S39 management software can display basic manufacturer
information about a GBIC module in an AT-8024GB switch or the fiber
optic ports in an AT-8026FC switch.
To display uplink information, perform the following procedure:
1. From the Main Menu, type 8 to select Diagnostics.
2. From the Diagnostics window, type 7 to select GBIC Uplink
Information.
The GBIC Information window in Figure 14 is displayed.
Figure 14 Uplink Information Window
3. Type 1 to select Uplink Information.
The following prompt is displayed:
Enter Uplink Port number -> [25 to 26]
4. Type either 24 or 25; these are the port numbers for GBIC modules in
an AT-8024GB switch.
Allied Telesyn AT-8024 Ethernet Switch
Uplink Information Menu
1 - Uplink Information
R - Previous Menu
Enter your selection: