Switch default settings, Table11 switch default settings, Switch default settings -4 – Allied Telesis AT-S20 User Manual
Page 16: 6zlwfk#'hidxow#6hwwlqjv
Switch Default Settings
1-4
6ZLWFK#'HIDXOW#6HWWLQJV
Table 1-1 lists the switch default settings.
Table 1-1 Switch Default Settings
Settings
Default
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway Address
0.0.0.0
Get community string
public
Set community string
private
Trap community string
public
Port mirroring state
Disabled
Spanning Tree Protocol
Disabled
Omega Access
Enabled
System Name
None
Password (Omega)
No password assigned
Download Password
ATS20
Port Priority
128
Port Path Cost
100 (AT-3726)
Auto-negotiate, Full-duplex or Half-duplex (per port)
Auto-negotiate (AT-3726XL,AT-3726,
AT-3716XL)
Half-duplex (AT-3714FXL, AT-3714F)
Spanning Tree Priority
32768
Maximum Aging Time
20 seconds
Forwarding Delay
15
Hello Time
2 seconds
Transmit Pacing/Backpressure
Disabled
Bridge Identifier (STP)
32768 (bridge priority)
Port Priority (STP)
128
Port Cost (STP)
100 for 10 Mbps ports
10 for 100 Mbps ports
Domain Name
None
Timeout Value
5 minutes
Default VLAN Name
Default VLAN