Allied Telesis AT-S20 - Manual (Page 35)

AT-S20 User’s Guide
4-5
(QDEOLQJ#RU#'LVDEOLQJ#D#3RUW
0HQX1#
Port status and configuration> <Port
Number>
Ports are enabled as a default.
Disable a port if you suspect there is a problem and you want to
isolate the problem to that port, therefore preventing error
proliferation. You may also want to temporarily disable a port that is
not in use (an unoccupied office, for example) for security reasons.
1. Select Port Status and configuration to display the
list of ports.
2. Select a port number, for example, 1 , from the list.
The port configuration screen appears here partially shown.
3. Select the option to enable or disable the selected port.
4. Select Return to Port Status Menu... to display the
list of ports with the updated information. For example, a
disabled Port 1 displays.
Port 1
Link State: Online
Port State: Enabled
Transmission Mode: Half Duplex
Please select an option:
>Enable this port
Disable (partition) this port
Port Status
Port Link Status Mode
1:Finance Online Disabled Half duplex
2:Sales Online Enabled Full duplex
Disabled port