Allied Telesis AT-S20 - Manual (Page 52)

Enabling/Disabling Omega Access
4-22
(QDEOLQJ2'LVDEOLQJ#2PHJD#$FFHVV
/RFDO#2PHJD
The default for Local Omega is Enabled . This means you can access
the Omega menus from a terminal or PC connected to the switch’s
RS232 port.
5HPRWH#2PHJD
The default for Remote Omega is Enabled.
You still can use SNMP to manage the hub remotely. To change the
setting again, use Local Omega.
:HE0EDVHG
2PHJD
The default for Web-based Omega is Enabled .
0HQX1#
System configuration> Omega Options
Figure 4-1 Enabling/Disabling Omega
Omega Options Menu
Brandy
Password: Null (not configured)
Timeout: 5
> Local Omega Enabled
Disable Local Omega
> Remote Omega Enabled
No Remote Omega
> Web-based Omega Enabled
Exclude Web-based Omega
Return to System Configuration Menu ...