Installation, Oven assembly – Blodgett DFG-100 XCEL User Manual
Page 6
Advertising
4
Installation
oven Assembly
SAnitAtion BoLtS
These bolts are required to block any exposed hole on the
back of an oven. This includes:
• any unit, single or stacked, without a back panel.
• any holes in stacked units not used for mounting
stacking brackets.
1. Locate the 5/16” bolts that were shipped with the
oven.
2. Install the bolts as shown in Figure 2.
Figure 2
Double Stacked Units
Units without Back Panels
Advertising