Swiftech H20 220 APEX ULTRA REV2 User Manual
Page 15
Copyright Swiftech 2007 – All rights reserved – Last revision date: 10-08-07 - Information subject to change without notice – URL:
http://www.swiftech.com
Rouchon Industries, Inc., dba Swiftech – 3700 Industry Avenue, Suite 104, Lakewood, CA 90712 – Toll free (US) 888-857-9438 – Fax 562-595-8769 - E Mail:
PAGE 15 of 24
The Apogee GT water-block ships pre-installed with the multi-socket hold-down plate. In order to install your Apogee with AMD’s AM2
socket, you will need to remove the existing hold-down plate and replace it with the AM2 model as follows:
Step 1: loosen all 4 screws using the included hex key, and set
aside the standard hold-down plate.
Step 2: place the AM2 hold-down plate on the Apogee body, and
fasten all four screws in cross pattern.
You can now use your Apogee GT with AM2 socket. Please read the common and step by step installation guidelines in page 2 to
proceed with the installation of the product.