Axis Communications LBP 5200 - Manual (Page 66)

Printing from the Multi-purpose Tray 2-27
Loading and Collecting P
aper
2
- Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
• Before loading the envelopes, flatten the stack of envelopes to release any remaining air,
and press the fold lines along the edges tight.
• Do not print on the reverse side (glued side) of envelopes.
• The printing speed drops when printing envelopes.
NOTE
Printing on envelopes may produce wrinkles in the envelopes.
1
Open the multi-purpose tray and pull out the auxiliary tray.
Refer to "Opening the Multi-Purpose Tray," on p. 2-16 for instructions on opening
the multi-purpose tray.
2
Push the paper guides out a little wider than the actual width
of the envelopes.
3
Place the stack of envelopes on a flat surface and push on the
top surface to clear out any trapped air, then push down firmly
along the folded edges to flatten the envelopes.