Nikon 24-120mm-f-35-56G-ED-IF-AF-S-VR-Zoom - Manual (Page 16)

16
En
Focusing
Set your camera's focus mode selector according to this chart:
Autofocus with manual override (M/A mode)
1 Set the focus mode switch to M/A. (Fig. B)
2 Autofocus is provided, but you can manually override the focus by operating the
separate focus ring while lightly depressing the shutter release button or AF start
(AF-ON) button on the camera body of cameras so equipped.
3 To cancel manual override, remove your finger from the shutter release button or
the AF start button.
Vibration reduction mode
The following cameras are usable:
35mm SLR cameras: F6, F5, F100, F80-Series/N80-Series, F75-Series/
N75-Series, F65-Series/N65-Series;
Digital SLR cameras: D2-Series, D1-Series, D100, D70
･ When using the lens with cameras other than those listed above, set the vibration
reduction ON/OFF switch to OFF to cancel the vibration reduction mode. With the
Pronea 600i/6i camera, in particular, battery power may become depleted quickly if this
switch is left ON.
Lens’ focus mode
Cameras M/A M
Autofocus with manual Manual focus
priority (Focus assist is available.)
Manual focus
(Focus assist is available.)
Other Nikon AF cameras Manual focus
(except the F3AF, F-601/N6006 * ) (Focus assist is available.)
C
S
AF
M
M
C
S
AF
F6, F5, F4-Series, F100,
F90X/N90s*, F90-Series/N90
* ,
F80-Series/N80-Series * , F75-Series/
N75-Series * , F70-Series/N70 * ,
F65-Series/N65-Series * ,
Pronea 600i/6i * , Pronea S,
D2-Series, D1-Series, D100, D70
* Sold exclusively in the U.S.A.
Camera’s focus mode