PerTronix JBA Exhaust 1840S-4 - Manual (Page 4)

LIMITED ONE YEAR WARRANTY
All JBA HEADERS and exhaust products are guaranteed, to the original purchaser, to be free of defects in materials and workmanship for one
year. This warranty covers the replacement or repair of the product only and does not cover the cost of removal and installation, customer ap-
plied aftermarket coatings or any discoloration or corrosion of finished surfaces.
Damage or product failure resulting from collision, improper installation, off-road use, road hazards, the use of exhaust insulating wrap or like
products or rust occurring after installation, is not covered by the warranty. The warranty extends only to the original purchaser.
Should a part become defective it should be returned to the original selling retailer and must be accompanied with the sales receipt. If there is
no retailer in your area, call the factory for a return authorization and return your part prepaid to the factory for inspection. PerTronix reserves
the rights to replace or repair the alleged defective part and return the part freight collect.
Parts List:
(1) Driver’s Side Header Assembly
(1) Passenger’s Side Header Assembly
(10) 3/8” x 1” header bolts and lock washers
(2) Header gaskets (Header to Head flange)
(6) Collector Bolts, Nuts &Washers.
(4) 1/4” I.D. x 1/2” long tubular spacer for the spark plug looms
(4) 1/4” x 1” bolts for the spark plug looms
(2) 3/8” I.D. x 1” long tubular spacer for the steel power steering pump
bracket.
(1) Heat Riser Tube Adapter
(1) Hose Clamp for Heat Riser
15. If retaining the heat riser, clamp the supplied heat riser adapter to the header using the sup-
plied hose clamp. Shorten flexible heat riser tube to fit. Take care not to cut the tube too short.
16. Recheck everything!
17. Start the engine and let it warm up. Check for leaks. Shut engine off and let it cool down.
Check to make sure all fasteners are tight.
18. Periodically check and retighten the header bolts.