PerTronix JBA Exhaust 6625S User Manual
Page 5
NOTE:
Apply a small bead of high temperature silicone around the dome on the
passenger side header for added leak protection.
18.
Reconnect the battery cable.
19.
Re-check everything for adequate clearance on A/C lines, steering shaft, brake
lines, etc.
20.
Start the engine and let it warm up. Check for leaks. Shut engine off and let it
cool down. Check to make sure all fasteners are tight.
21.
Periodically check and retighten the header bolts.
Parts List:
(1) Driver ’s Side Header Assembly
(1) Passenger ’s Side Header Assembly
(2) Header gaskets (Header to Head flange)
(1) Base flange gasket
(18) 8mm x 1.25 Header bolts w/lock washers (Torque to 13 lbs./in on
aluminum heads)
(2) 3/8” x 1-1/2” Collector bolts w/washers -(2 flat washers and 1 lock
washer per)
(2) 3/8” x /2” Collector bolts w/washers -(2 flat washers and 1 lock
washer per)
(2) 8mm flat washers
(1) 8mm x 1.25 nut
Other recommended parts:
P/N 6625H JBA 3” High Flow H-pipe
P/N 6625HC JBA 3 ” High flow H-pipe with cats
P/N 40-2626 JBA Evol™ Exhaust System 3” Stainless Steel
For more information about this and other JBA products visit
www.jbaheaders.com