PerTronix Dougs Headers D328 - Manual (Page 3)

0110-003107 Page 3 of 3 8-15-2011 DSL
Illustration A; Air conditioning Bracket.
IMPORTANT CHECK LIST
Be sure that all brake lines and fuel lines are clear of headers and/or
connector pipes.
All spark plug wires, battery cables, or other electrical components should be
clear of headers and/or connector pipes.
If dipstick tube was removed, make sure it is installed properly and that the
dipstick has been replaced.
Double-check the tightness of all bolts including brackets and accessories.
START THE ENGINE
Start the engine and allow it to warm up to operating temperature. Check for any
unusual noises or exhaust leaks. If every thing is OK, stop the engine and tighten all
bolts while the engine is still warm. NOTE: Check the bolts periodically to make
sure they have not loosened. Re-tighten after the first 500 miles and then again at
1000 miles
PARTS LIST
Qty Description
1 Left Side Header
1 Right Side Header
2 Header Gaskets
2
3 ½” Reducers
2 3 ½”, 3 Bolt Collector Gaskets
16
3/8”-16 X 1” Header Bolts
6 3/8”-16 X 1 ¼” Hex Head Cap Screws
6
3/8”-16 Hex Nut
22 3/8” Lock-Washers
2
Doug’s Stickers