PerTronix Dougs Headers D3330 - Manual (Page 3)

Part No. 0110-003061
Page 3 of 4
REV3 3-5-13 DSL
3/4”
1”
Fig. 1
EGR Fitting
Stock EGR tube.
Screw the cut end into the
EGR fitting on the installed
header. Align this bent
tube stub with the
remaining EGR tube.
Make the first cut
approx.
1” from
where the bend
begins.
Cut
On the second cut
remove approx.
¾”
excess length from
EGR tube. Reweld
this EGR tube to the
bent tube stub.
EGR TUBE MODIFICATION
Step #2
Step #1
Step #3
R-3 R-2
Spacer