PerTronix Dougs Headers D380 - Manual (Page 3)

Part No. 0110-003113
Page 3 of 3
rev 1 7-19-12 DSL
9) Start the car and check for leaks
IMPORTANT CHECK LIST
Be sure that all brake lines and fuel lines are clear of headers and/or connector pipes.
All spark plug wires, battery cables, or other electrical components should be clear of
headers and/or connector pipes.
Double-check the tightness of all bolts including brackets and accessories.
STARTING THE ENGINE
Start the engine and allow it to warm up to operating temperature. Check for any unusual
noises or exhaust leaks. If every thing is OK, stop the engine and tighten all bolts while
the engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten
after the first 500 miles and then again at 1000 miles.
PARTS LIST
Qty Description
1 Left side header
1 Right side header
2 Header gaskets
12 3 /8 X 1“, header bolts
12 Lock-washer
2 Doug’s Stickers
1977-82 Bracket Spacer
1963-67 Rocker modification 1967-82 Rocker modification