PerTronix Dougs Headers D567 - Manual (Page 3)

Part No. 0110-003008
Page 3
Rev 2 12-20-2010 DSL
IMPORTANT CHECK LIST
Be sure that all brake lines and fuel lines are clear of headers and/or connector pipes.
All spark plug wires, battery cables, or other electrical components should be clear of headers and/or
connector pipes.
If dipstick tube was removed, make sure it is installed properly and the dipstick has been replaced.
Double-check the tightness of all bolts including brackets and accessories.
START THE ENGINE
Start the engine and allow it to warm up to operating temperature. Check for any unusual noises or
exhaust leaks. If everything is OK, stop the engine and tighten all bolts while the engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten after the first 500
miles and then again at 1000 miles.
PARTS LIST
Qty Description (D564) Qty Description (D567)
1 Left side header 1 Left side header
1 Right side header 1 Right side header
2 Header gaskets 2 Header gaskets
1 Oil filter gasket 1 Oil filter gasket
2
3” reducers
2
3 ½” reducers
2 3 ”, 3 bolt collector gaskets 2 3 ½”, 3 bolt collector gaskets
12 3/8”-16 x 1” header bolts 12 3/8”-16 x 1” header bolts
6
3/8”-16 x 1 ¼” hex head cap screws
6
3/8”-16 x 1 ¼” hex head cap screws
6 3/8”-16 hex nuts 6 3/8”-16 hex nuts
18 3/8” lock-washers 18 3/8” lock-washers