PerTronix Dougs Headers D569 - Manual (Page 3)

Part No. 0110-003009
Page 3
Rev2 12-20-2010 DSL
START THE ENGINE
Start the engine and allow it to warm up to operating temperature. Check for any unusual
noises or exhaust leaks. If every thing is OK, stop the engine and tighten all bolts while
the engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten
after the first 500 miles and then again at 1000 miles.
PARTS LIST
Qty Description (D569) Qty Description (D568)
1 Left side header 1 Left side header
1 Right side header 1 Right side header
2 Header gaskets 2 Header gaskets
1 Oil filter gasket 1 Oil filter gasket
2 3” reducers 2 3 ½” reducers
2 3”, 3 bolt collector gaskets 2 3 ½”, 3 bolt collector gaskets
12
3/8”-16 x 1” header bolts
12
3/8”-16 x 1” header bolts
6
3/8”-16 x 1 ¼” hex head cap screws
6
3/8”-16 x 1 ¼” hex head cap screws
6 3/8”-16 hex nuts 6 3/8”-16 hex nuts
18 3/8” lock-washers 18 3/8” lock-washers