PerTronix Dougs Headers D6659 - Manual (Page 3)

Part No. 0110-003038
Page 3
rev.1 11-19-13 DSL
Check clearance and tightness of front driveshaft.
START THE ENGINE
Start the engine and allow it to warm up to operating temperature.
Caution! Hot parts! Wear protective clothing as needed.
Check for any unusual noises or exhaust leaks. If every thing is OK, stop the engine and
tighten all bolts while the engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten after the
first 500 miles and then again at 1000 miles.
PARTS LIST
Qty. Description
1 Right side header
1 Left side header
4 Header gaskets (2 for each header)
1 Decal:
DOUG’S HEADERS
1 Sticker, C.A.R.B., E.O., D-57-19
1 Hardware kit:
16 8mm x 1.25 x 30mm hex flanged bolts
16 8mm lock-washers
4 3/8”-16 x 2” hex bolts
4
3/8”-16 x 2” hex nuts
4 3/8” lock-washers