Aga Ranges U104601-01 - Manual (Page 41)

41
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
Assemble the range
Fit the Door Handles
Remove the 4mm Hex headed screws from the
doors with the hexagon key tool. Use the screws
to fi t the door handles.
The handles should be above the fi xings.
Fit the plastic blanking plugs to the fi xing holes.
Fit the Handrail
Remove the 4mm Hex headed screws from the
top corners of the fascia.
Fix the front handrail in position. Fit the plastic
blanking plugs to the fi xing holes.
Fitting the rear spacer
Rear spacer.
Fix the splash to the fl ue grill with the two
screws from below and then fi t the two end caps.
End cap
They are held in place by three fi xing nuts on the
inside face.
Refi t the complete assembly of the fl ue grille
rear extension and splash to the range using the
two screws.