Nikon D3300 - Manual (Page 279)

259 B The Setup Menu: Camera Setup
❚❚ Location Data
This item is used to adjust settings for optional GP-1 or GP-1A
GPS units (
0 309). The unit can be connected to the camera’s
accessory terminal ( 0 309) using the cable supplied with the
device, allowing information on the camera’s current position to
be recorded when photographs are taken (turn the camera off
before connecting the unit; for more information, see the
manual provided with the device).
The Location data menu contains the options listed below.
• Standby timer: Choose whether the exposure meters turn off
automatically when the unit is attached.
• Position: This item is only available if a GP-1 or GP-1A is
connected, when it displays the current latitude, longitude,
altitude, and Coordinated Universal Time (UTC) as reported by
the unit.
• Set clock from satellite: Choose Yes to set the camera clock based
on the time provided by the satellite navigation system.
Option Description
Enable
Exposure meters turn off automatically if no operations
are performed for the time selected for Auto off timers >
Standby timer in the setup menu (
0 245; to allow the
camera time to acquire location data, the delay is
extended by up to one minute after standby timer is
activated or the camera is turned on). This reduces the
drain on the battery.
Disable
Exposure meters do not turn off while the unit is
connected.
A Coordinated Universal Time (UTC)
UTC data is provided by the location data satellite system and is
independent of the camera clock.