Nikon D3300 - Manual (Page 377)

357 Technical Notes
A Optional Accessories
• 52 mm screw-on filters
• LF-1 and LF-4 rear lens caps
• Flexible Lens Pouch CL-0815
• Bayonet Hood HB-69
Align the lens hood mounting mark (
●) with the lens hood alignment
mark ( ) as shown in Figure q and then rotate the hood (w) until
the
● mark is aligned with the lens hood lock mark (—{).
When attaching or removing the hood, hold it near the symbol on its
base and avoid gripping it too tightly. Vignetting may occur if the
hood is not correctly attached.
The hood can be reversed and mounted on the lens when not in use.