Nikon AW120 - Manual (Page 211)

E 83
Re
feren
c
e
S
ect
io
n
Create Log (Record the Log of Movement
Information)
When log recording starts, the measured movement information is recorded
until a preset time has elapsed at the interval set for Log interval.
• The recorded log data cannot be used by itself. To use the data, end log
recording and save it to a memory card.
1
Use the multi selector
HI to
select a log to be recorded, and
press the
k button.
• Select a log to be recorded from the
following logs.
- Start all logs: The location data, altitude
and water depth information log data is
recorded.
- Start location log: The location data log data is recorded.
- Start depth log: The water depth information log data is recorded.
2
Select the log interval that will be
used for recording a log, and press
the
k button.
• The intervals that can be set for recording a
log vary depending on the log to be
recorded.
Press the
d button M z (location data options) menu icon M Create
log
M k button
End depth log
Start depth log
End location log
Start location log
End all logs
Start all logs
Create log
10 min
5 min
3 min
1 min
30 s
15 s
Log interval