Troubleshooting – Nikon D200 User Manual

Page 199

Advertising
background image

189

Technical Not

es—

T

roubleshooting

Troubleshooting

If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon representative. Refer to the page
numbers in the right-most column for more information.

Problem

Solution

Camera takes time to turn on.

Delete fi les or folders.

105,

133

Viewfi nder is out of focus.

• Adjust viewfi nder focus.
• Use optional diopter adjustment lens.

16

181

Viewfi nder is dark.

Charge battery or insert charged battery.

10

Displays turn off without warning.

Choose longer monitor off or meter off delays. 157

Unusual characters displayed in con-
trol panel

See “A Note on Electronically Controlled Cam-
eras,” below.

Displays in control panel or viewfi nd-
er are slow and dim

Displays are aff ected by high or low tempera-
tures.

7

• Fine lines around active focus area

in viewfi nder

• Viewfi nder display turns red

These phenomena are normal and do not indi-
cate a malfunction.

Playback menu is unavailable.

Insert memory card.

14

Menu item is unavailable.

Insert memory card. Battery Info option is
only available when using EN-EL3e batteries.

14

123

Image size can not be changed.

NEF (RAW) selected for image quality.

28

Shutter release is disabled.

• Aperture not locked at highest f/-number.
• Memory card is full or not inserted.
• Flash is charging.
• Camera is not in focus.
• Exposure mode S selected with

select-

ed for shutter speed.

8

14
79
20

64,

68

A Note on Electronically-Controlled Cam er as

In extremely rare in stanc es, un usu al char ac ters may ap pear in the control panel and the
cam era may stop func tion ing. In most cas es, this phe nom e non is caused by a strong ex-
ter nal stat ic charge. Turn the cam era off , re move and replace the battery (note that the
battery may be hot), and turn the cam era on again, or, if you are using an AC adapt er (avail-
able sep a rate ly), dis con nect and re con nect the adapt er and turn the cam era on again. In
the event of con tin ued mal func tion, con tact your re tail er or Nikon rep re sen ta tive. Note
that dis con nect ing the power source as de scribed above may result in loss of any data not
re cord ed to the memory card at the time the prob lem occurred. Data already recorded to
the card will not be aff ected.

Advertising