Nikon D200 - Manual (Page 85)

75
Ref
er
enc
e
—Exposur
e
The camera modifi es exposure by varying shutter speed and aperture (programmed
auto), aperture (shutter-priority auto), or shutter speed (aperture-priority auto, manual
exposure mode). When On is selected for Custom Setting b1 (ISO Auto), the camera
will automatically vary ISO sensitivity for optimum exposure when the limits of the cam-
era exposure system are exceeded. If Custom Setting e5 (Auto BKT Set) is set AE Only
or to AE & Flash and On is selected for Custom Setting b1 (ISO Auto), the camera will
vary ISO sensitivity without varying shutter speed or aperture, regardless of the setting
chosen for Custom Setting e6 (see below).
Exposure Bracketing
Shooting Mode
In single frame and self-timer modes, one shot will be taken each time the shutter-release
button is pressed. In continuous low speed and continuous high speed modes, shooting
will pause af ter the number of shots specifi ed in the bracketing pro gram have been taken.
Shooting will resume the next time the shutter-release button is pressed.
Re sum ing Exposure or Flash Bracketing
If the mem o ry card fi lls before all shots in the sequence have been taken, shooting can be
resumed from the next shot in the sequence after the memory card has been re placed or
shots have been deleted to make room on the memory card. If the camera is turned off
before all shots in the sequence have been taken, brack et ing will resume from the next
shot in the sequence when the cam era is turned on.
e6—Manual Mode Bkting ( 167)
This option controls how the camera performs exposure and fl ash bracketing in manual
exposure mode. Bracketing can be performed by varying fl ash level together with shutter
speed and / or aperture, or by varying fl ash level alone.
e7—Auto BKT Order ( 167)
This option can be used to change the bracketing order.