Nikon S800c - Manual (Page 119)

E 3
Using Easy Panorama (Shooting and Playback)
Re
fe
re
n
ce
S
ec
ti
o
n
Example of Camera Movement
• The operator, without shifting position, moves the camera horizontally or
vertically in an arc so that the guide travels from one edge to the other.
• Shooting stops if the guide does not reach the edge within about 15 seconds
(when W Normal (180°) is selected) or within about 30 seconds (when X
Wide (360°) is selected) after shooting starts.
B
Notes About Easy Panorama Shooting
• The range of the image seen in the saved image will be narrower than that seen in the monitor at
the time of shooting.
• If the camera is moved too quickly or shaken too much, or if the subject is too uniform (e.g. walls or
darkness), an error may occur.
• If shooting stops before the camera reaches the halfway point in the panorama range, a panorama
image is not saved.
• If more than half of the panorama range is captured but shooting ends before reaching the edge
of the range, the range not captured is recorded and displayed in gray.
C
Changing the Shooting Range
• In easy panorama scene mode, press the d button,
tap p, and tap W Normal (180°) or X Wide
(360°).
• When the camera is held in the horizontal position
during shooting, the image size (width × height) is as
follows:
- Normal (180°): 3200 × 560 when moved horizontally,
1024 × 3200 when moved vertically
- Wide (360°): 6400 × 560 when moved horizontally, 1024 × 6400 when moved vertically
- When the camera is held in the vertical position during shooting, the direction and the width
and height are switched.
Easy panorama
Normal (180°) Wide (360°)