Nikon S800c - Manual (Page 137)

E 21
Transferring Images to Your Smart Device
Re
fe
re
n
ce
S
ec
ti
o
n
Simple Setup (Automatically Connecting the Camera to the
Smart Device)
Turn on the Wi-Fi (wireless LAN) function when using the simple setup function to
automatically connect the camera to your smart device. For more information
about connecting to a Wi-Fi (wireless LAN) network, see “Setting Up a Wi-Fi
(Wireless LAN) Network” (
A80).
Once a smart device has been configured with simple setup, you do not have to
configure the settings again the next time you connect the smart device, see
“Notes About Simple Setup” (
E23).
1
Open the Upload to smart device
application on the camera screen.
• Open the Connect to S800c application on
the smart device screen.
• For more information about opening
applications, see “Opening Applications and
Putting Them in Stand by Mode” (
A89).
2
Tap Simple setup on the camera screen.
• After that, tap Simple setup on the smart device screen.
3
Tap START on the camera screen.
• After that, tap START on the smart device screen.
15:30
Play Upload Browser Shooting
Settings
Simple setup
Upload to smart device
15:30
START
Simple setup
Upload to smart device
Start Connect to S800c on the smart device
and tap START.
15:30