Troubleshooting – Nikon 995 User Manual

Page 84

Advertising
background image

167

166

Troubleshooting

If the COOLPIX995 is not operating properly, check the following items.
If the problem persists, contact the retailer where you bought this
camera or an authorized Nikon dealer or service center.

Problem

Power does not turn on.

Power turns off
immediately.

Cannot take photo when
Shutter release button is
fully depressed.

Monitor is blank or
images on the Monitor
are not clear.

Photos not in focus.

The Speedlight does not
fire.

Image color is unnatural.

Check points

• Battery level is low.
• Battery is incorrectly installed.
• AC adapter is incorrectly connected.

• Battery level is low.
• Using camera at low temperatures.

• Mode dial is not set to

or .

• CF memory card is not compatible with

the COOLPIX995.

• Card memory is full (delete images).
• Self-timer is selected.
• The Red LED is flashing slowly indicating

that the Speedlight is charging (takes a
few seconds).

• Bright sunlight or other high-intensity

light is falling on the Monitor. Use the
Viewfinder or move to a location where
there is less light.

• The Monitor has become dirty and

should be cleaned.

• The subject is low-contrast or not

suitable for autofocus systems. Try
Manual focus.

• The Speedlight is stowed.
Int Flash Off setting is “On”.
Continuous mode, Best Shot Selector

or Lens mode is selected.

• The photo was taken under conditions in

which white balance could not be
adjusted. Try Preset White Balance.

Page

31
30

154

31

44
36

163

60
53
69

46

165

81
82

50

133

99,

102,

106

95

Shooting

Power

Problem

Cannot play back
image.

Playback image is not
displayed on TV
monitor.

Image is not displayed
clearly/image color is
not correct.

Cannot transmit data to
computer.

Check points

• Mode dial is not set to ˘.
• The CF memory card does not contain

picture data.

• All image data in the memory card are

deleted or card has been formatted.

• Camera is not correctly connected to the

TV set.

• The TV is not set to the Video input.
• The camera is connected to the

antenna/aerial input.

• The camera is not correctly connected to

the TV/contact is incorrect (connect
camera and TV correctly).

• TV monitor's setting is not correct (refer

to TV instruction manual).

•The camera is not correctly connected to

the computer (refer to Nikon View 4
instruction manual).

Page

44
36
74

138

38

155

155

156

Other

Playback

Miscellaneous

COOLPIX995 (E) 01.5.30 0:44 PM Page 166

Advertising