Nikon 995 - Manual (Page 88)

175
Specifications
—continued
174
Interface USB, video output (NTSC/PAL selectable)
I/O terminal DC input, Video output, Digital terminal (USB), Sync
terminal
Power requirements One Li-ion Rechargeable Battery EN-EL1, or one 6V
lithium battery (2CR5/DL245) (optional)
External power source (8.4V, 1.3A)
Battery life Approx. 110 min. when using the Monitor and one Li-ion
Rechargeable Battery EN-EL1 at normal temperature
(20°C/68°F)
Operating environment Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: under 85% (without condensation)
Dimensions (W x H x D) 138 x 82 x 40mm/5.4 x 3.2 x 1.6 in. (Grip: 59mm/2.3 in.)
Weight Approx. 390g/13.8 oz. (without battery)
Supplied accessories Li-ion Rechargeable Battery EN-EL1, Battery Charger,
USB Cable, Video cable, CompactFlash™ (CF) Memory
Card, Strap, Lens cap, Instruction manual, Nikon View 4
CD-ROM (contains Nikon View 4 and bundled software),
CD-ROM instruction manual for Nikon View 4, “Open Me
First!” Envelope
Lightly pressing the Shutter release button or MONITOR button will cancel Auto
Power Off. Displays on the Control panel and the Monitor will reappear. Camera
settings made before the Auto Power Off mode will be reactivated.
All specifications apply when a fully charged battery is used at normal temperature
(20°C/68°F).
Battery life and performance may vary depending on type, operating environment
and date of manufacture.
* With Zoom, 30% flash firing, in FINE mode at 20°C/68°F
* Battery power can be saved by turning off the Monitor and using the Viewfinder.
* Specifications and equipment are subject to change without notice or obligation
on the part of the manufacturer.
When monitor ON
Li-ion Rechargeable Battery EN-EL1 Approx. 220 frames or 110 min.
For reference: Number of exposures per battery
Activating Auto Power Off
Auto Power Off
The COOLPIX995 Auto Power Off function automatically switches the camera to
energy-saving mode after a certain period of time after the last camera operation.
• With Auto Power Off, Control panel and Monitor displays disappear.
• Those camera settings, that were set before Auto Power Off was activated
remain in camera memory.
• Do not store the camera while it is in Auto Power Off mode. If the Shutter release
button is pressed in Auto Power Off mode, the mode will be canceled.
In Shooting , mode In Playback ˘ mode
Control panel/ During Video Control panel/ During Video
Monitor output* 1 Monitor output* 1
*1 About Video output, see p. 155.
*2 Default setting is 30 seconds.
*3 Press the MONITOR button to turn on the Monitor.
Canceling Auto Power Off
With EN-EL1, 2CR5/DL245
With AC adapter
Automatically
turns off after
selected time
(0.5/1/5/30 min.)
when other
camera controls
are not operated
(Shooting menu
will disappear after
3 min.)*
2
Automatically
turns off after 30
min. when other
camera controls
are not operated
Automatically turns
Video output off
after selected time
(0.5/1/5/30 min.)
when other camera
controls are not
operated (Shooting
menu will
disappear after 3
min.)
Continues to
output even after
30 min. when other
camera controls
are not operated
(only Monitor
display
disappears)*
3
Automatically
turns off after
selected time
(0.5/1/5/30 min.)
when other
camera controls
are not operated
(Playback menu
will disappear after
3 min.)*
2
Automatically
turns off after 30
min. when other
camera controls
are not operated
Automatically turns
Video output off
after selected time
(0.5/1/5/30 min.)
when other camera
controls are not
operated (Playback
menu will
disappear after 3
min.)
Continues to
output even after
30 min. when other
camera controls
are not operated
(only Monitor
display
disappears)*
3
Miscellaneous
COOLPIX995 (E) 01.5.30 0:44 PM Page 174