Nikon L610 User Manual
Page 163
E
45
Re
fere
nce
S
ecti
o
n
B
Notes About Continuous Shooting
• When a setting other than Single is selected, flash cannot be used. Focus, exposure, and white
balance are fixed at the values determined with the first image in each series.
• It may take some time to save the images after shooting. The amount of time it takes to finish
saving the images depends on the number of images, image mode, the write speed of the
memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• When Continuous is set to Multi-shot 16, banding or variance in brightness or hue may occur in
images that were captured under lighting that flickers at high speeds, such as fluorescent,
mercury-vapor, or sodium-vapor lighting.
• Some settings cannot be used with other functions (A 65).
C
Images Captured Using “Continuous”
Each series of images captured is saved as a “sequence” (
C
More Information
• Subjects Not Suitable for Autofocus ➝ A 72
• Viewing and Deleting Images Captured Continuously (Sequence) ➝ E14