Nikon L610 - Manual (Page 92)

74
Playback Fe
atures
Playback Zoom
Rotating the zoom control to g (i) in full-frame playback mode (A 30) zooms in on the
center of the image displayed in the monitor.
• You can change the zoom ratio by rotating the zoom control to f (h) or g (i). Images
can be zoomed up to approx. 10×.
• To view a different area of the image, press the multi selector H, I, J, or K.
• If you are viewing an image that was captured using face detection (A 67) or pet
detection ( A 43), the camera zooms in on the face detected at the time of shooting. If the
camera detected multiple faces when the image was captured, press H, I, J, or K to
display a different face. To zoom in on an area of the image where there are no faces,
adjust the zoom ratio and then press
H, I, J, or K.
• You can crop the image and save the displayed area of the image as a separate file by
pressing the d button (E25).
• Press the k button to return to full-frame playback mode.
4 / 4 4 / 4
1 5 / 1 1 / 2 0 1 2 1 5 : 3 0 1 5 / 1 1 / 2 0 1 2 1 5 : 3 0
0 0 0 4 . J P G
0 0 0 4 . J P G
g (i)
f
(h)
Image is zoomed in. Image is displayed full-frame.
Displayed area guide