Using the flash, Flash mode (a50), A50) – Nikon S9700 User Manual
Page 74
Advertising
50
Sh
ooting Fea
tures
Using the Flash
You can select the flash mode to match the shooting conditions.
1
Press the multi selector
H (m).
2
Select the desired flash mode
(
A52) and press the k button.
• If a setting is not applied by pressing the k
button within a few seconds, the selection
will be canceled.
B
The Flash Lamp
• The status of the flash can be confirmed
by pressing the shutter-release button
halfway.
- On: The flash fires when you press the
shutter-release button all the way
down.
- Flashing: The flash is charging.
The camera cannot shoot images.
- Off: The flash does not fire when an image is taken.
• If the battery level is low, the monitor turns off while the flash is charging.
Auto
Advertising