Nikon S4100 - Manual (Page 162)

150
Setup Menu
Basi
c Came
ra Setup
3
Tap
o.
The time zone selection screen is displayed.
4
Tap
E or F to choose the travel destination
time zone and tap I.
If daylight saving time is in effect, tap p to enable
daylight saving time function. W is displayed at the top
of the monitor and the camera clock is advanced one
hour. Tap p again to disable the daylight saving time
function.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
B
Note on the Clock Battery
The camera clock is powered by the clock battery. The clock battery charges when the main battery
is inserted or an AC adapter is connected, and can provide several days of backup power after about
ten hours of charging.
C
w Home Time Zone
• To switch to the home time zone, tap w Home time zone in step 2.
• To change the home time zone, tap w Home time zone in step 2 and complete steps 3 and 4.
C
Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.
D
Imprinting Date on Pictures
Enable the
Print date option (A 153) in the setup menu after the date and time have been set.
When the
Print date option is enabled, pictures will be recorded with shooting date imprinted on
them.
Time zone
Home time
zone
Travel
destination
Travel destination