Nikon S4100 - Manual (Page 166)

154
Setup Menu
Basi
c Came
ra Setup
w Electronic VR
Choose whether or not to use electronic VR (vibration reduction), which reduces
the effects of camera shake during shooting.
B
Notes on Electronic Vibration Reduction
• The effectiveness of electronic VR decreases as camera shake increases.
• The pictures taken using electronic vibration reduction may be somewhat “grainy” in appearance.
• Electronic VR does not function under the following conditions or in the following shooting
modes:
- When slow sync with red-eye reduction (
A 64, 65) is used
- When exposure exceeds a certain length of time
- When
ISO sensitivity (A 53) is set to Auto
- When
Blink proof (A 77) is set to On in smart portrait mode
- In the following scene modes:
Sports (A 64), Night portrait (A 64), Dusk/dawn (A 66),
Night landscape (A 66), Museum (A 68), Fireworks show (A 68), and Backlighting
(
A 69)
• The angle of view (the area captured in the recorded movie) is smaller when electronic VR is
enabled during movie recording.
Tap the bottom tab ( A 147) M Tap z (Setup menu) M w Electronic VR
Auto
When taking still pictures, electronic VR is enabled when R ( A 10) is displayed in
the monitor and all of the conditions below are met.
• The flash is turned off or set to slow sync mode.
• A slow shutter speed is used.
• Continuous is set to Single.
• The subject is dark.
When recording movies, electronic VR is enabled at all times.
Off (default setting)
Electronic VR is disabled.