Nikon D700 - Manual (Page 211)

185
l
Using the Built-in Flash
Follow these steps when using the built-in flash.
1
Choose a metering method
(pg. 112).
Select matrix or center-weighted
metering to activate i-TTL balanced fill-
flash for digital SLR. Standard i-TTL flash
for digital SLR is activated automatically
when spot metering is selected.
2
Press the flash pop-up button.
The built-in flash will pop up and begin
charging. When the flash is fully
charged, the flash-ready indicator (c)
will light.
3
Choose a flash mode.
Press the M button and rotate
the main command dial until
the desired flash mode icon is
displayed in the control panel
(pg. 188).
Metering selector
Flash pop-up button
M button
Control panel
Main command
dial