Nikon D700 - Manual (Page 335)

309
U
e3: Flash Cntrl for Built-in Flash
Choose the flash mode for the built-in flash.
A “Manual” and “Repeating Flash”
Y icons blink in the control panel and viewfinder when these options are
selected.
A The Shooting Information Display
The flash control mode for the built-in flash can be
viewed in the shooting information display
(pg. 189).
A The SB-400
When an optional SB-400 flash unit is attached
and turned on, Custom Setting e3 changes to
Optional flash, allowing the flash control mode
for the SB-400 to be selected from TTL and
Manual (Repeating flash and Commander
mode options are not available).
Option Description
1 TTL
(default)
Flash output is adjusted automatically in response to
shooting conditions.
2
Manual
Choose the flash level (pg. 310).
3
Repeating
flash
The flash fires repeatedly while the shutter is open,
producing a strobe-light effect (pg. 310).
4
Commander
mode
Use the built-in flash as a master flash controlling
one or more remote optional flash units (pg. 311).