Nikon COOLPIX-A - Manual (Page 135)

115
l
A
See Also
For information on using the f button and the command dial to
choose the flash mode, see page 193.
A
Lowering the Built-in Flash
To save power when the flash is not in use, press
it gently downward until the latch clicks into
place. Do not use force; failure to observe this
precaution could result in product malfunction.
D
The Built-in Flash
The shutter release may be briefly disabled to protect the flash after it
has been used for several consecutive shots. The flash can be used again
after a short pause.
Objects close to the camera may appear overexposed in photographs
taken with the flash at high ISO sensitivities.