Nikon L830 - Manual (Page 163)

E 63
Re
fe
re
nce
S
ect
ion
Photo VR
Set to reduce the effects of camera shake while shooting still images.
Set to Off when using a tripod to stabilize the camera during shooting.
B
Notes About Photo VR
• After turning on the camera or after switching from playback mode to shooting mode, wait for the
shooting mode screen to be displayed completely before taking images.
• Images displayed in the camera monitor immediately after shooting may be displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When the shutter speed is extremely slow, images cannot be corrected by image processing even
when this function is set to On (hybrid).
• When using some scene modes, special effects mode, and smart portrait mode, images cannot be
corrected by image processing even when this function is set to On (hybrid).
d button M z menu icon M Photo VR M k button
Option Description
V On (hybrid)
The effects of camera shake are optically reduced using the lens shift
method. Under the following conditions, images are corrected digitally
using image processing.
• Flash: Does not fire
• Shutter speed: Slower than 1/30 second (at the wide-angle position)
or 1/250 second (at the telephoto position)
• Self-timer: Off
• Continuous setting: Single
• ISO sensitivity: 200 or lower
It may take more time than usual to save images.
g On (default setting) The effects of camera shake are reduced using the lens shift method.
Off Vibration reduction is disabled.