Nikon L830 - Manual (Page 41)

21
Th
e Bas
ics of
Shoo
ting and
Pl
ayb
ack
C
Notes About the Flash
When you need to use the flash, such as when shooting in dark locations or when the subject is
backlit, press the
m (flash pop-up) button to raise the flash (A 5, 44).
C
The Auto Off Function
• The time that elapses before the camera enters standby mode is about 30 seconds. The time can
be changed using the Auto off setting in the setup menu ( A 72).
• While the camera is in standby mode, the monitor turns back on if you perform any of the
following operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b (e movie-record) button
1 9 0 0 1 9 0 0
2 5 m 0 s 2 5 m 0 s
Flashes
No operations
performed
No operations
performed
3 min
Camera enters
standby mode.
Camera turns off.