Nikon D2X - Manual (Page 236)

222
Menu Guide—The Setup Menu
Network settings: Adjust settings for connection
to a wireless network. Press the multi selector up
or down to highlight an option and then press the
multi selector to the right.
Option Description
Load
settings fi le?
Load Wireless, TCP/IP, and FTP settings from camera memory
card.
Wireless
Adjust SSID, ad hoc, encryption, and compatibility settings for con-
nection to wireless network.
TCP/IP
Adjust or view TCP/IP settings, including IP address, DNS, and gate-
way settings.
FTP
Enter password and user ID and adjust settings for connection to ftp
server.
Choose
settings
Wireless, TCP/IP, and FTP settings are stored in one of four banks
(A, B, C, and D). Store settings for different networks in different
banks and switch between them using this menu. Descriptive cap-
tions can be added to bank names as described on page 168.
Pairing options: Pair the camera with computers
running Nikon Capture 4 Camera Control (re-
quires Nikon Capture 4 version 4.2 or later, avail-
able separately). Once paired with the camera,
the computer will automatically connect when
Camera Control is started, allowing the camera to
be controlled remotely from the computer. The camera can store up to ten
pairs of connections (note that each computer can control only one camera
at a time, and that each camera can be controlled by only one computer at
a time). Before pairing the camera with a computer, adjust wireless network
settings appropriately.