Nikon P520 - Manual (Page 149)

E25
Editing Movies
Re
fe
re
nce
S
e
ct
io
n
B
Notes on Editing Movies
• Use a fully charged battery to prevent the camera from turning off during editing. When the
battery level is B, movie editing is not possible.
• Once a movie is created through editing, it cannot be used again for extracting a movie. To extract
another range, select and edit the original movie.
• Because the edited movies are extracted in one-second units, they may vary slightly from the set
start point and end point. Sections shorter than two seconds cannot be extracted.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
C
More Information
See “File and Folder Names” ( E90) for more information.
Saving a Frame from a Movie as a Still Picture
A frame from a recorded movie can be extracted and saved as a still picture
(except for movies recorded with
n 1080/60i, q 1080/50i, p iFrame
540/30p or iFrame 540/25p).
• Pause a movie and display the frame to be extracted
( A97).
• Choose H on the playback control with the multi
selector J or K and press the k button.
• When the confirmation dialog is displayed, choose
Yes and press the
k button to save.
• The still picture is saved with Normal as the image
quality. The image size is determined by the type
(image size) (
E48) of the original movie.
For example, the image size of a still picture saved
from a movie recorded with d 1080P/30p or
1080P/25p is
i (1920 × 1080 pixels).
7m42 7m42s 7m42s
No
Yes
Copy this frame as a still image?