Using the zoom – Nikon P520 User Manual
Page 47
29
Step 3 Frame a Picture
The
Basic
s of
Shootin
g
and Playback
Using the Zoom
Rotate the zoom control to activate the optical zoom.
• To zoom in so that the subject fills a larger area of
the frame, rotate toward
g (telephoto zoom
position).
• To zoom out so that the area visible increases in the
frame, rotate toward
f (wide-angle position).
• Rotating the zoom control all the way in either
direction adjusts the zoom quickly, while rotating
the control partially adjusts the zoom slowly (except
during movie recording).
• The zoom can also be operated by rotating the side
zoom control (
A2) toward g or f.
The function of the side zoom control can be set in
the Assign side zoom control in the setup menu
(
• Amount of zoom is displayed at the top of the
monitor screen when the zoom control is rotated.
• Rotating the zoom control toward
g at the
maximum optical zoom ratio triggers the digital
zoom and the digital zoom can magnify up to about
2× beyond the maximum magnification of the
optical zoom.
C
Digital Zoom and Interpolation
• When the digital zoom is used, the image quality starts to
deteriorate if the zoom position is increased beyond the V
position on the zoom bar.
The V position moves to the right as the image size (
becomes smaller.
• Using Digital zoom in the setup menu (
A103), it is possible to set the digital zoom so that it
does not operate.
C
More Information
• See "Zoom memory" (
A69) for more information.
• See "Startup zoom position" (
A69) for more information.
Zoom out
Zoom in
Optical
zoom
Digital
zoom