Nikon S550 - Manual (Page 126)

114
Basic Camera Setup: The Setup Menu
S
h
oot
in
g, Playbac
k
an
d S
e
tu
p Me
nus
w Electronic VR
Specify the electronic vibration reduction setting for shooting still pictures.
When R is displayed in the monitor with Auto specified, the camera applies
vibration reduction to suit shooting conditions (
A 6).
B
Notes on Electronic VR
• Electronic VR may not work properly immediately after the camera is turned on or reactivated from
standby mode.
• Electronic VR does not work when the exposure time is faster than a certain value.
• Electronic VR is less effective for when pictures are considerably blurred.
• Blurred subjects cannot be compensated.
D
Electronic Vibration Reduction Icons in Playback Mode
The compensated pictures are marked with the R icon in full-frame playback mode. If electronic VR
cannot compensate a blurred picture, the picture is marked with the Q icon in full-frame playback
mode (
A 7, 50).
D
Compensating Movies with Electronic VR
Electronic VR can be enabled for movie recording from Electronic VR ( A 63) in the movie menu
( A 62).
Auto (default setting)
The effects of camera shake and blurred subjects are reduced while pictures are
shot under the following conditions:
• Flash mode is set to Off or Slow sync
• Shutter speed is slow
• Single is selected for the Continuous setting
Off
Electronic vibration reduction is not enabled.