Nikon S2 - Manual (Page 154)

134
i
Select On to enable electronic vibration reduction in Motion
Snapshot mode (
0 64), when filming movies in auto and cre-
ative modes, and when HD movie is selected in advanced movie
mode (
0 48, but note that electronic VR is not available when
1080/60p or 720/60p is selected for Frame size/frame rate).
This feature is available even if the attached 1 NIKKOR lens does
not support vibration reduction. Note that there will be a slight
delay before recording begins and that the edges of the image
will be cropped out when On is selected.
Choose how the camera focuses.
* Shutter can only be released if camera is able to focus.
Electronic VR
Focus Mode
AF-A
Auto-select AF : The camera automatically selects AF-S if the subject is
stationary, AF-C if it is moving.
AF-S
Single AF : For stationary subjects. Focus locks when the shutter-
release button is pressed halfway.
*
AF-C
Continuous AF : For subjects in motion. The
camera focuses continuously on the sub-
ject in the AF-area brackets while the
shutter-release button is pressed half-
way (note that the AF-area brackets
appear only in the detailed display;
0 165). Photos can be taken whether or
not the camera is in focus.
AF-area brackets
AF-F
Full-time AF : For subjects in motion. The camera focuses continu-
ously; photos can be taken whether or not the camera is in focus.
MF
Manual focus : Focus manually ( 0 136). Photos can be taken whether
or not the camera is in focus.